Products Levelling Supports Levelling support type 245
for containers with ISO corners up to max. 11 t total weight
For levelling or stabilising a container or container-like module. Locking in DIN ISO 1161 corner fittings. The upper outrigger leans against the...
Simple installation on the ISO corners
Manual drive based on trapezoidal thread spindle
Mechanical (direct drive by spanner or hand ratchet)
Corrosion protection - Duplex process
Foot plate permanently attached
Levelling support for ISO containers with single load capacity up to 5.5 t
(lifting capacity in system of 4 single supports up to 11 t)
Lifting height 200 mm
Spindle driven directly via spanner or hand ratchet.
| Load capacity in the system | 11.000 kg |
| Load capacity per support | 5.500 kg |
| Lifting height | 200 mm |
| Overall height | 460 mm |
| Weight per support | 22 kg |
| Drive | Mechanical (direct drive by spanner or hand ratchet) |
| Max. ground inclination | Standard: 3,0 degrees |
| Wind speed | Standard: 20 m/s (72 km/h) |
| Temperature range | -32°C - +49°C |
Levelling support for ISO containers with single load capacity up to 4 t
(lifting capacity in system of 4 single supports up to 8 t)
Lifting height 300 mm
Spindle driven directly via spanner or hand ratchet.
| Load capacity in the system | 8.000 kg |
| Load capacity per support | 4.000 kg |
| Lifting height | 300 mm |
| Overall height | 575 mm |
| Weight per support | 16 kg |
| Drive | Mechanical (direct drive by spanner or hand ratchet) |
| Max. ground inclination | Standard: 3,0 degrees |
| Wind speed | Standard: 20 m/s (72 km/h) |
| Temperature range | -32°C - +49°C |
Levelling support for ISO containers with single load capacity up to 3 t
(lifting capacity in system of 4 single supports up to 6 t)
Lifting height 400 mm
Spindle driven directly via spanner or hand ratchet.
| Load capacity in the system | 6.000 kg |
| Load capacity per support | 3.000 kg |
| Lifting height | 400 mm |
| Overall height | 680 mm |
| Weight per support | 17 kg |
| Drive | Mechanical (direct drive by spanner or hand ratchet) |
| Max. ground inclination | Standard: 3,0 degrees |
| Wind speed | Standard: 20 m/s (72 km/h) |
| Temperature range | -32°C - +49°C |
For levelling or stabilising a container or container-like module.
Locking in DIN ISO 1161 corner fittings.
The upper outrigger leans against the contact surface of the container (smooth sheet or angle).
Direct spindle drive via a key or hand ratchet.
Optional prop adapter for lateral stiffening.
Whatever you are planning -
we support you and your project.
