Different adaptation solutions possible
Storage box
Further different additional options available on request
Directions
Unter den Linden 1
D-99830 Treffurt
Levelling support type 274
for function modules and trailers up to 10 t total weight
The leveling jacks series 274 are manufactured in various modifications with different interfaces, such as with screwing plates, angles, catches...
Highlights
Installation
Screwable adapter plates or brackets.
Transport
Support permanently connected to the module.
Remains on the module during transport.
Drive
Manual drive based on trapezoidal thread spindle
Operation
Manual operation with insertable hand crank
Corrosion protection
Corrosion protection - Duplex process
Equipment
Hand cranks
Levelling support type 274 - Models
Levelling support 5.0 tons, 400 mm lifting height
Specifics
The leveling jacks series 274 are manufactured in various modifications with different interfaces, such as with screwing plates, angles, catches or collar plates.
Specifications:274-T01
| Load capacity in the system | 10.000 kg |
| Load capacity per support | 5.000 kg |
| Lifting height | 400 mm (spindle stroke) |
| Overall height | ca. 895 mm |
| Weight per support | ca. 35 kg |
| Drive | mechanical (hand crank) |
| Max. ground inclination | Standard: 3,0 degrees |
| Wind speed | Standard: 20 m/s (72 km/h) |
| Temperature range | -32°C - +49°C |
Levelling support 5.0 tons, 400 mm quick release, 300 mm spindle stroke
Specifics
The leveling jacks series 274 are manufactured in various modifications with different interfaces, such as with screwing plates, angles, catches or collar plates.
Support with spindle and quick release (increased lifting height)
Specifications:274-T02
| Load capacity in the system | 10.000 kg |
| Load capacity per support | 5.000 kg |
| Lifting height | 300 mm (quick release) and 400 mm (spindle stroke) |
| Overall height | ca. 925 mm |
| Weight per support | ca. 36 kg |
| Drive | mechanical (hand crank) |
| Max. ground inclination | Standard: 2,0 degrees |
| Wind speed | Standard: 20 m/s (72 km/h) |
| Temperature range | -32°C - +49°C |
Levelling support 2.5 tons, 300 mm lifting height || for trailers with increased stiffness
Specifics
Mobile earth station for Ka-band require tailor-made solutions of the support against the floor, for the trailer and for the container to ensure the required stability against tilting of the antenna. The Hetek product 274-1530725 can afford these rigidities required. Robust, low-backlash design, special connection elements and additional lashing produce the desired result.
Specifications:274-T03
| Load capacity in the system | 5.000 kg |
| Load capacity per support | 2.500 kg |
| Lifting height | 300 mm |
| Overall height | ca. 830 mm |
| Weight per support | ca. 48 kg |
| Drive | mechanical (hand crank) |
| Max. ground inclination | Standard: 2,0 degrees |
| Wind speed | Standard: 20 m/s (72 km/h) |
| Temperature range | -32°C - +49°C |
Options
Gallery
Product information
The leveling jacks series 274 are manufactured in various modifications with different interfaces, such as with screwing plates, angles, catches or collar plates.
An additional quick release is also possible, which significantly increases the lifting height and speeds up the levelling process.
