Lifting System Type 260

for containers with ISO corners, up to max. 15 t total weight

Lifting device for containers up to 15 tons total weight. Lifting system consisting of 4 individual supports for loading and unloading...

Highlights

Installation

Simple installation on the ISO corners
Configurations for different container dimensions (also adjustable)

Transport

Stowing on the container during transport

Drive

Drive via ball screw, low maintenance

Operation

Manual operation with plug-in hand crank, optionally with electric motors
Automatic levelling in case of electric drive

Corrosion protection

Duplex process - steel parts hot-dip galvanised, industrial paint according to RAL Classic

Equipment

Foot plates, hand cranks.
For electric drive: control unit, remote control, cabling

Lifting System Type 260 - Models

Lifting system type 260 with swivel booms

Specifics

With the swivel booms, the supports are folded into the transport or working position.

For front installation, a distance of at least 600 mm is required between the driver’s cab and the container.

Mounting on the container on the longitudinal side is also possible as an option.

Drive manually via hand cranks – optionally with a connecting shaft.

Optional:
Electric drive, with automatic levelling control.
Manual emergency drive.

Specifications:260-T01
Load capacity in the system max. 15.000 kg
Load capacity per support max. 7.500 kg
Lifting height Standard: 1.750 mm
up to max. 2.000 mm possible
Drive Electric drive (mains connection 24 VDC | 400 VAC | 230 VAC), manual emergency drive
Max. ground inclination Standard: 3,5 degrees
Wind speed Standard: 20 m/s (72 km/h)
Temperature range -32°C - +49°C

Lifting system type 260 with pull-out booms

Specifics

With the pull-out booms, the supports are slided into the transport or working position.

A distance of at least 250 mm is required between the driver’s cab and the container.

Also available as a mixed set
(front with pull-out booms, rear with svivel booms)

Drive manually via hand cranks – optionally with a connecting shaft.

Optional:
Electric drive, with automatic levelling control.
Manual emergency drive.

Specifications:260-T02
Load capacity in the system max. 15.000 kg
Load capacity per support max. 7.500 kg
Lifting height Standard: 1.750 mm
up to max. 2.000 mm possible
Drive Electric drive (mains connection 24 VDC | 400 VAC | 230 VAC), manual emergency drive
Max. ground inclination Standard: 3,5 degrees
Wind speed Standard: 20 m/s (72 km/h)
Temperature range -32°C - +49°C

Options

  • Installation winch
  • Lifting height up to max. 2000 mm (under reduced conditions)
  • Max. ground inclination up to 7 degrees possible
  • Installation universally adjustable optionally for front or longitudinal locking
  • Special locking for front installation on the freight container - door opening > 90 degreesElectric drive (mains connection 24 VDC | 400 VAC | 230 VAC), manual emergency drive
  • Cable drums for winding up the support cables
  • Power supply unit for different supply voltages
  • Storage box
  • Further different additional options available on request
  • Extended temperature ranges possible on request

Product information

Lifting device for containers up to 15 tons total weight.

Lifting system consisting of 4 individual supports for loading and unloading a container or container-like module from a vehicle without the assistance of an external loading device (crane, forklift etc.).

The supports are attached to the container via the ISO corners and can remain on the container during transport.

Different configuration variants are possible.

Large selection of additional options.

Applications

Lifting System Type 260 for containers with ISO corners, up to max. 15 t total weight

Lifting device for containers up to 15 tons total weight.

Request

    *required

    Whatever you are planning -

    we support you and your project.

    +49 (0) 36923/53 - 0
    info@hetek.de
    Directions

    Unter den Linden 1
    D-99830 Treffurt