Levelling support type 262

Levelling support type 238

The series provides simple, solid spindle supports with manual drive for leveling containers or structures near ground with ISO corners interface.

Levelling support type 239

Electrically operated levelling system with automatic levelling control. The supports can be installed either over the ISO corners of the container or in the niches which are provided for this purpose (foldable).

Levelling support type 245

For levelling or stabilising a container or container-like module. Locking in DIN ISO 1161 corner fittings. The upper outrigger leans against the contact surface of the container (smooth sheet or angle). Direct spindle drive via a key or hand ratchet. Optional prop adapter for lateral stiffening.

Levelling support type 248

The supports of the series 248 are locked in the ISO corners and are characterized by ease of use and reliability. An additional, conjugated top upper boom provide increased stability allows compensation of 3.5° ground slope with a 20 'container at 10t load.

Levelling support type 256

The leveling jacks series 256 with manual drive can be folded for transport into the niche. As a result, the containers outside dimensions are not exceeded and transport costs can be optimized. The tactical times for bringing into operation of the container can be reduced by this integrated solution.

Levelling support type 262

The leveling jacks series 262 are manufactured in various modifications and with different interfaces, as plug in jack, with screw plates, with fish plates, collar plates or with locking for ISO corners. An additional quick release is also possible.

Nivellierstütze 263

Levelling support type 272

The supports series 272 are locked into the ISO corners and are characterized by high operating convinience of use and reliability. An additional conjugating top boom provide increased stability and allows compensation of 3.5° ground slope with a 20' container at 16t load. Jacks can hold a static load up to 24t.

Levelling support type 274

The leveling jacks series 274 are manufactured in various modifications with different interfaces, such as with screwing plates, angles, catches or collar plates. An additional quick release is also possible, which significantly increases the lifting height and speeds up the levelling process.

Levelling support type 282

The levelling props of the 282 series are produced in different modifications and with different interfaces, such as screw-on plates or weldable collars. The supports are used for levelling and stabilising of vehicles, modules and containers with transmission masts.

Levelling support type 286

The supports of the series 286 are locked into the ISO-corners. The spindle is capsulated and is directly driven manually from above by means of a ratchet crank. An additional conjugated locked upper boom provide increased stability.

Levelling support type 287

The leveling jacks models 287 and 287/B are electrically operated levelling system with automatic levelling control, which could be integrated with various interfaces in container, function modules or vehicles and stabilize them.

Levelling support type 289

The manually driven leveling 289 are locked from underneath into the ISO corners and used for leveling containers.

Levelling support type 519

The supports of the series 248 are locked in the ISO corners and are suitable for use on heavy containers up to max. 25 t total weight. An additional, conjugated top upper boom provide increased stability allows compensation of 3.0° ground slope.

Load capacity in the system	6.000 kg
Load capacity per support	3.000 kg
Lifting height	400 mm (spindle stroke)
Overall height	ca. 850 mm
Weight per support	ca. 24 kg
Drive	mechanical (hand crank)
Max. ground inclination	Standard: 2,0 degrees
Wind speed	Standard: 20 m/s (72 km/h)
Temperature range	-32°C - +49°C

Load capacity in the system	6.000 kg
Load capacity per support	3.000 kg
Lifting height	300 mm (quick release) and 400 mm (spindle stroke)
Overall height	ca. 750 mm
Weight per support	ca. 25 kg
Drive	mechanical (hand crank)
Max. ground inclination	Standard: 2,0 degrees
Wind speed	Standard: 20 m/s (72 km/h)
Temperature range	-32°C - +49°C

Load capacity in the system	6.000 kg
Load capacity per support	3.000 kg
Lifting height	400 mm (spindle stroke)
Overall height	ca. 850 mm
Weight per support	ca. 24 kg
Drive	mechanisch (Handkurbel)
Max. ground inclination	Standard: 2,0 degrees
Wind speed	Standard: 20 m/s (72 km/h)
Temperature range	-32°C - +49°C

Levelling support type 262

Highlights

Installation

Drive

Operation

Corrosion protection

Equipment

Levelling support type 262 - Models

Levelling support 6.0 tons, 400 mm lifting height

Specifics

Specifications:262-T01

Levelling support 6.0 tons, 400 mm quick release, 300 mm spindle stroke

Specifics

Specifications:262-T02

Levelling support 6.0 tons for ISO container, 400 mm lifting height

Specifics

Specifications:262-T03

Options

Gallery

Product information

Applications

Levelling support type 262 for different adaptation solutions, up to 6 t total weight

Levelling support type 262 for different adaptation solutions, up to 6 t total weight

Request

Levelling Supports

Lifting Systems

Container movement systems

Directions